Label/Tag Dimension (mm) : 61.5 x 20 x 7 mm ( Hole Dia: 3.0 )
IC Type: Alien Higgs 3 / Higgs 9
Read Range : Up to 10 Meters (Fixed Reader) / Up to 5 Meters (Handheld Reader)
Operating Temperature: -40 °C to +80 °C

Label Dimension (mm) : 98 x 12 x 0.2 mm
IC Type : Alien Higgs-3/Higgs-9
Read Range from a : Up to 8 Meters (Fixed Reader) / Up to 4 Meters (Handheld Reader)
Operating Temperature : -40 °C to +85 °C

Start the tracking cycle by detecting and recording the movement of RFID-tagged inventory from the moment it enters your backroom to the moment it leaves. Handle high tag volumes with increased accuracy and read rates. Installation is simple–just mount the supplied bracket and insert the Backroom SmartLens Sensor. Eliminate the need to install power outlets with Power- over-Ethernet (PoE)—ideal for typical complex backroom environments. Easily deploy by just turning on the device and you’re up and running.

Dimensions (in mm) : 432 x 254 x 178
Connector : N-Type Female x 2
Casing/Materials : Aluminum with white plastic cover
Gain : 2 dBil
Maximum Power : 18 Watts
Application: Stock room aisles, Flush mount ceiling or wall applications, Receiving and staging areas, Open work areas etc.

The SNAP (Sensing Network Appliance) SmartLens Sensor is loaded with the technology you need to obtain real-time visibility into what is happening on your sales floor. Track the movement of items with the integrated high-performance RFID reader. These overhead sensors are designed to accommodate different store ceiling types and heights. And sensor housings can be customized to complement your store’s architecture and aesthetics.

Dimensions (in mm) : 541 mm diameter x 197 mm
Ethernet Ports : Input: Ethernet auto sensing/negotiation 802.3af/at compliant port for SNAP communication and power supply
Memory : Flash 512 MB; DRAM 256 MB
Network Stack : IPv4 and IPv6
Application: Point of sale bypass detection, Administrative shrink, Identify return fraud, Asset tracking etc.

The SNAP (Sensing Network Appliance) SmartLens Sensor is loaded with the technology you need to obtain real-time visibility into what is happening on your sales floor. Track the movement of items with the integrated high-performance RFID reader. These overhead sensors are designed to accommodate different store ceiling types and heights. And sensor housings can be customized to complement your store’s architecture and aesthetics.

Dimensions (in mm) : 541 mm diameter x 197 mm
Ethernet Ports : Input: Ethernet auto sensing/negotiation 802.3af/at compliant port for SNAP communication and power supply
Memory : Flash 512 MB; DRAM 256 MB
Network Stack : IPv4 and IPv6
Application: Point of sale bypass detection, Administrative shrink, Identify return fraud, Asset tracking etc.

The AN670 low-profile, near-field RFID antenna is designed with a tightly constrained spatial range for precise control, allowing you to read assets within a specific proximity. It also has increased power density that allows you to read a broader range of product types. Its ultrathin, 1/3″ profile means it can be used in even the smallest settings without being noticed.

Dimensions (in mm) : 604 x 304 x 8.5
Connector : SMA Female Fly Lead
Casing/Materials : Flame retardant ABS
Maximum Power : 3 Watts
IP Sealing : IP54
Application: Point of sale, Under the counter, Within shelving, Inside medical cabinets etc.

The AN670 low-profile, near-field RFID antenna is designed with a tightly constrained spatial range for precise control, allowing you to read assets within a specific proximity. It also has increased power density that allows you to read a broader range of product types. Its ultrathin, 1/3″ profile means it can be used in even the smallest settings without being noticed.

Dimensions (in mm) : 604 x 304 x 8.5
Connector : SMA Female Fly Lead
Casing/Materials : Flame retardant ABS
Maximum Power : 3 Watts
IP Sealing : IP54
Application: Point of sale, Under the counter, Within shelving, Inside medical cabinets etc.

ZT400 Series RFID printers/encoders help keep your critical operations running efficiently. the ZT400 Series offers a factory- or field-installable UHF RFID encoder to support a broad range of applications across several industries. See printer status at a glance and manage settings quickly–including RFID–using the large color touch display. RFID-enabled, the 4-inch ZT411 and 6-inch ZT421 can print and encode labels as small as 0.6 in./16 mm. And, the ZT411 can print up to 600 dpi for extremely crisp resolution.
The ZT411 RFID, available in an on-metal version, is the only dedicated option for printing and encoding on-metal tags and labels.

• Integrated RFID system is user-upgradable in the field
• Optional field-upgradeable on-metal version available (ZT411 only)
• Prints and encodes tags with a minimum pitch of 0.6 in./16 mm
• Supports tags compatible with: UHF EPC Gen 2 V2.1, ISO/IEC 18000-63 and RAIN RFID protocols
• Compliant with Global RFID radio to support multinational deployments
• Automatically eliminate complex RFID placement guidelines with adaptive encoding technology
• Variable inlay placement supports a range of inlay positions for maximum media flexibility
• Track performance with RFID job-monitoring tools
• Support for industry standard multi-vendor chip-based serialization (MCS)
• Supports block permalocking of user memory compatible with ATA Spec 2000
• Integrated RFID reader/encoder

Label/Tag Dimension (mm) : 91.5 x 24 x 11 mm ( Hole Dia: 4.0 )
IC Type: NXP Ucode 8
Read Range : Up to 10 Meters (Fixed Reader) / Up to 5 Meters (Handheld Reader)
Operating Temperature: -40 °C to +80 °C